Guardian Furnace Installation Manual

  суббота 06 октября
      10

Very Unsatisfied Review: 'Poor product' My Guardian/york furnace was installed 9 years ago and has required regular repairs in the past 5 years. The blower motor went out after 5 years.

When you see this symbol on the furnace and in instructions or manuals, be alert to the potential for personal injury. Understand the signal words DANGER, WARNING. The following list includes important facts and information regarding the. EB furnace and its packaging inclusions: 1. Furnace is rated at 240 volts, 60 Hz, single.

I have also replaced the flame sensor and a temperature control after those items went out in following years. The condensate pan developed cracks two years ago that leaked corrosive water onto the sheet metal inside the unit. Benz ir nec key programmer software download. I initially removed and patched the pan in an attempt at avoiding another costly repair but, have recently found new leaks.

The furnace is reliable in that I can count on it going down one or multiple times per winter. Guardian customer service was obviously not interested in helping. I would recommend avoiding any products by this company.

Date created: 2016-12-15 Name: Ben Location: OH Satisfaction Rating. Very Unsatisfied Review: 'Bad Choice' I have only had this furnace for a few years and have had to have something replaced every year. I have replaced the blower 2 times in 6 years and have only had the furnace 7. I have also relaced motors in it and now the board is no longer working. Or at least that is the current guess. There is no error code for the error its giving so the Guardian thinks the board is just bad. This is a lot of fun to have a furnace not working again when its down to -11 outside.

Service man told me that they stopped selling this furnace because of all the problem with them they see. Just wish I knew that before I bought it. I will not ever be getting this name brand again. Date created: 2016-11-29 Name: Chris Lentz Location: Kansas City, MO Satisfaction Rating. Very Unsatisfied Review: 'DO NOT BUY!'

I am a union pipe fitter service technician who sold and installed a RGF1L100CP20MP11A. ( 100,000 btu / 5ton drive, 80percent ). On start up, the furnace was vibrating so badly that it almost jumped off of its base. I removed the blower and found a 3/8' screw lodged in the wheel, which caused the blower to be out of balance. I replaced the wheel and motor with new.

I then found that the furnace would intermitantly lock out due to ignition failure. (It will not consistently light the burner). I verified that inlet and outlet gas pressure, and that the gas valve is operating correctly. Tomorrow I will remove the gas manifold and try to reposition burner #1 closer to the ignitor.